prabhu_a

Dr. A. Prabhu

Assistant Professor
Area: Internal Combustion Engine
Affiliation: Department of Automobile Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University).
 

Education
Ph.D.   NIT Tiruchirappalli, 2015
M.E. IC Engines Velammal Engineering College, 2011
B.E. Mechanical Engineering Magna Engineering College, 2009

Other Details:

Courses

  • Internal Combustion Engines
  • Alternative Fuels and Energy Systems
  • Automobile Engineering
  • Thermodynamics

Research Interests

  • I.C. Engines
  • Bio Fuels and Renewable Energy
  • Engine Emission Control
  • Modern Automobile Technology

Selected Publications

Journals

  • Prabu, A. and R. B. Anand, (2015), Emission control strategy by adding alumina and cerium oxide nano particles in biodiesel, Journal of the Energy Institute, 1-7.
  • Prabu, A. and R. B. Anand, (2015), Inhibition of NO emission by adding antioxidant mixture in Jatropha Biodiesel on the performance and emission characteristics of a C.I. Engine, Frontiers in energy, 9(2), 238-245.
  • Prabu, A. and R. B. Anand, (2015), Influence of oxygenate additives on the performance and emission characteristics of Jatropha fuelled direct injection diesel engine, Biofuels, 5(6), 667-672.
  • Prabu, A. and R. B. Anand, (2015), Performance, Combustion and Emission Characteristics of a D.I. Diesel Engine Fuelled with Nanoparticle Blended Jatropha Biodiesel, Periodica Polytechnica Mechanical Engineering, 59, 88-93.
  • Prabu, A. and R. B. Anand, (2014), Working Characteristics of a C.I. Engine Fuelled with Oxygenates as additives in Jatropha Biodiesel, Applied Mechanics and Materials, 592-594, 1842-1846.
  • Prabu, A. and R. B. Anand, (2012), Production and Application of Biodiesel – A Case Study, International Journal of Engineering Research and Development, 2, Issue 2, 28-41.
  • Arun, R., Muthe Srinivasa Rao., Prabu, A. and R. B. Anand, (2014), Experimental Investigation on DICI Engine by Using Chemical and Nano Additives Blended Biodiesel, Applied Mechanics and Materials, 592-594, 1575-1579.

Academic Experience:

  • February 2012 to November 2015: Full Time Research Scholar, Department of Mechanical Engineering, National Institute of Technology, Tiruchirapalli – 620 015, India.

Conferences/Seminars/Workshops Attended

  • Prabu, A. and R. B. Anand, (2013), Impact of oxygenated additives on the working characteristics of Jatropha biodiesel fuelled D.I. diesel engine, Smart Technologies For Mechanical Engineering, Delhi Technological University, October, 2013.
  • Prabu, A. and R. B. Anand, (2014), Working Characteristics of a C.I. Engine Fuelled with Oxygenates as additives in Jatropha Biodiesel, International Mechanical Engineering Congress, NITT, June, 2014.
  • Arun, R., Muthe Srinivasa Rao., Prabu, A. and R. B. Anand, (2014), Experimental investigation on DICI engine by using chemical and nano additives blended biodiesel, International Mechanical Engineering Congress, NITT, June, 2014.
  • Tony, Prabu, A. and R. B. Anand, (2013), Impact of nano particle addition in biodiesel on the working characteristics of a D.I. diesel engine, International Conference on Materials for the Future - Innovative Materials, Processes, Products and Applications, Govt. Engineering College Thrissur, November, 2013.
  • Three-day seminar short term course on “Applications of Finite Element Method in Academic and Industrial Reserach” during 06 - 08th June 2013, Organized by Department of Mechanical Engineering, NIT Trichy, Tamil Nadu. Sponsored by TEQIP –II.
  • Three days short-term course on “Automotive Fuels and Emission” during 12-14th June 2013, Organized by Department of Mechanical Engineering, NIT Trichy, Tamil Nadu, Sponsored by TEQIP –II.
  • Two days short-term course on “Integrating Energy and Environment Issues Towards Cleaner Environment” during 2-3th December 2013, Organized by Department of Chemical Engineering & Chemistry, NIT Trichy, Tamil Nadu, Sponsored by TEQIP –II.
  • Four days workshop on “Applications of Nanotechnology in Mechanical Engineering” during 18-21th December 2013, Organized by Department of Mechanical Engineering, NIT Trichy, Tamil Nadu, Sponsored by TEQIP –II.
     

                 

 

 

 

 

Mr. S.Prabhu
Dr. S.Prabhu

Head of Department
Area: Mechanical Engineering
Affiliation: Department of Mechanical Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University)
Email: prabhu.s@ktr.srmuniv.ac.in, hod.mech@ktr.srmuniv.ac.in

Education
Ph.D Area of Nanomachining SRM Institute of Science and Technology (formerly known as SRM University), Chennai, July 2013
M.E Production Engineering Madurai Kamarajar University, Madurai, Feb 2001
B.E Mechanical Engineering Bharathiar University, Coimbatore, May 1996
Other Details:

Course

  • Precision Engineering (Nanotechnology)
  • Computer Aided Manufacturing (CAM)
  • Advanced Materials Technology
  • CNC Programming
  • Advanced Metrology and quality control
  • Principles of CIM                        
  • Fundamentals of Industrial robotics
  • Drives and control system for robotics
  • Manufacturing Technology
  • Nano Composite
  • Nanomachining
  • Robot Programming
  • Special Experimental Techniques
  • Nano materials
  • Modern manufacturing Techniques
  • Nanorobotics
  • Design of Experiments

Research Interests

  • Nanomachining,
  • Nanofluids,
  • Nanocomposites,
  • Nanotechnology,
  • Expert systems,
  • Robots,
  • Design of Experiments,
  • Optimization Techniques.

Selected Publications
International Journals

  • Carlos TSCL, Uma M, Prabhu S, “  Analysis of P300 detection with different configuration electrodes based on offline dataset”, Journal of Chemical and Pharmaceutical Sciences, Vol.9,Issue 3, July-Sept 2016, Pp.1730-1734, ISSN:0974-2115, Scopus Indexed.
  • Prabhu.S, Olivernesaraj.S, “Adaptive Neuro-Fuzzy interference system modeling of EDM process using CNT infused Copper Electrode”, International Journal of Intelligent Engineering and Systems, Accepted, June 2016, ISSN :2185-3118,Scopus Indexed.
  • Prabhu.S, Vinayagam.B.K, “Multiresponse optimization of EDM process with nanofluids  using TOPSIS method and Genetic Algorithm”, Archive of Mechanical Engineering, Vol.63, Issue 1, Pp. 45–71, ISSN (Online) 2300-1895,DOI: 10.1515/meceng-2016-0003, April 2016.
  • Prabhu.S, Olivernesaraj.S, “Analysis of multi objective optimization using TOPSIS Method in EDM process with CNT infused Copper Electrode”, International Journal of Machining and Machinability of Materials (IJMMM), Accepted In press, Nov 2015. Inderscience publisher, Scopus SJR-0.034, SNIP-0.210.
  • Prabhu.S, Vinayagam.B.K, “Multi objective optimization of Multi Wall Carbon Nanotube based Nanogrinding wheel using Grey relational and Regression analysis”, Accepted, In press, July 2015, Journal of The Institution of Engineers (India): Series C, Springer, Issn: 2250-0545.
  • Prabhu.S, Uma.M, Priyan Prasad, “Analysis of Brain Computer Interface based Robot Wheel Chair control”, Vol.10, No.7, Pp.17171-17179, 2015, International journal of Applied Engineering Research (IJAER), Scopus Indexed, SJR-0.127, SNIP-0.034.
  • Balamurugan.S, Prabhu.S, “Performance characteristics analysis of automated robot spray painting using Taguchi method and Grey relational analysis”, Arabian Journal for Science and Engineering (AJSE), Vol.40, Issue 6, Pp.1657-1667, June 2015, Issn: 1319-8025, Springer Publication, Impact factor 0.728..
  • Prabhu.S, Jinju Joseph, “Design and analysis of a Mobile Modular Fixture Robot using Image processing”, Vol.10, No.2, Pp.2241-2255, 2015, International journal of Applied Engineering Research (IJAER), Issn: 0973-4562, Scopus Indexed, SJR-0.127, SNIP-0.166.
  • Prabhu.S, Vinayagam.B.K, “Optimization of Carbon nanotube based Electrical discharge machining parameters using full factorial design and Genetic Algorithm”, Published Online, 26th November 2015, Australian journal of Mechanical Engineering, Australia, Issn:1448-4846, Scopus SJR-0.162, SNIP-0.230. DOI:10.1080/14484846.2015.1093221.
  • Prabhu.S, Uma.M., Vinayagam.B.K, “Surface roughness prediction using Taguchi-Fuzzy logic-Neural network analysis for CNT Nanofluids based grinding process”, Neural Computing and Applications, Volume 26, Issue 1, Pp 41-55,January 2015, Springer, Impact factor 1.492, Issn No.:0941-0643.
  • Prabhu.S, Vinayagam.B.K, “Multi objective optimization of ELID grinding process using Grey relational analysis coupled with Principal component analysis” Advances in Mechanical Engineering, Volume 2014, Pp1-12, July 2014, Sage Publishing Corporation, UK, Article ID 878510, Issn No.:1687-8132, Impact factor 0.575. http://dx.doi.org/10.1155/2014/878510.
  • Shubrajit Bhaumik, S.Prabhu, Kingsly Jeba Singh, “Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity”, Advances in Tribology, Scopus Indexed, Hindawi Publishing Corporation, Volume 2014, March 2014, Article ID 341365, Pp.1-8, http://dx.doi.org/10.1155/2014/341365.
  • Prabhu.S, Vinayagam.B.K, “ANFIS modeling of multi objective optimization of electrical discharge machining process using SWCNTs”, Vol.13, Isssue.2, June 2015, pp.97-117. Australian journal of Mechanical Engineering, Australia, Issn:1448-4846, Scopus SJR-0.162, SNIP-0.230.
  • Prabhu.S, Uma.M., Vinayagam.B.K, “Electrical Discharge Machining parameters optimization using Response Surface Methodology and Fuzzy Logic Modeling”, Journal of the Brazilian society of Mechanical Sciences and Engineering (JBSMSE), Vol.36, May 2014, Issue 3, pp. 637-652. Issn:1678-5878, Springer Publication. Impact factor 0.963.
  • Prabhu.S, Vinayagam.B.K, “AFM Investigation in grinding process with Nanofluids using Taguchi Analysis”, International Journal of Advanced Manufacturing Technology, Issn: 0268-3768, Vol. 60, pp.149–160, 2012, Springer Publication, Impact factor 1.568.
  • Prabhu.S, Vinayagam.B.K, “AFM Surface Investigation of Inconel 825 with Multi Wall Carbon Nano Tube in Electrical Discharge Machining Process using Taguchi analysis”, Archives of Civil and Mechanical Engineering (ACME) journal, Vol.11, Issue 1, 2011,pp.149-170,online available 18th may 2012, Impact factor 2.194, Elsevier.
  • Senthilkumar.R, Prabhu.S, Cheralathan.M., “Experimental Investigation on CNTs Coated Brass Rectangular Extended Surfaces,” Applied Thermal Engineering, Vol. 50, 2013, Pp.1361-1368. Elseiver, Impact factor 3.043.
  • Prabhu,S, Vinayagam.B.K, “Nano Surface generation of grinding process using carbon nano tubes”, Sadhana Vol.35, Part 6, December 2010, pp. 747–760, Springer Publication, Impact factor 0.349.
  • Prabhu.S, Vinayagam.B.K, “Fractal Dimensional surface analysis of AISI D2 tool steel material with nanofluids in grinding process using Atomic force microscopy”, Journal of the Brazilian society of Mechanical Sciences and Engineering (JBSMSE), Vol.XXXIII, No. 4 , pp. 459-466, Oct-Dec 2011,Issn:1678-5878, Impact factor 0.963.
  • Prabhu.S, Vinayagam.B.K, “Analysis of Surface characteristics by Electrolytic In-process Dressing (ELID) Technique for Grinding process using Single wall carbon nano tube based nanofluids”, Arabian Journal for Science and Engineering (AJSE), Vol.38, No.5, Pp 1169-1178, 2013, Issn: 1319-8025, Springer Publication, Impact factor 0.728.
  • Prabhu.S, Vinayagam.B.K, “AFM nano analysis of Inconel 825 with Single Wall Carbon Nano Tube in Die Sinking EDM Process using Taguchi Analysis”, Arabian Journal for Science and Engineering (AJSE), Vol.38, No.6, Pp 1599-1613, June 2013, Issn: 1319-8025, Springer Publication, Impact factor 0.728.
  • Senthilkumar.R, Prabhu.S, Nandhakumar.A.J.D, “Natural convective heat transfer of nano coated aluminium fins using Taguchi method,” Online first, 14th August 2012, Heat and Mass Transfer (HMT), Springer, Impact factor 1.044.
  • Prabhu.S, Uma.M., Vinayagam.B.K, “Adaptive Neuro Fuzzy Interference System modeling of Carbon nanotube based Electrical Discharge machining process”, Journal of the Brazilian society of Mechanical Sciences and Engineering (JBSMSE), Vol.35, November 2013, Issue 4, pp. 505-516. Issn:1678-5878, Springer Publication. Impact factor 0.963.
  • Prabhu.S, Vinayagam.B.K, “Multi objective optimisation of SWCNT based Electrical Discharge Machining process using Grey relational and Fuzzy logic analysis”, International Journal of Machining and Machinability of Materials (IJMMM), Vol.13, No.4, Pp.439-463, 2013. Inderscience publisher, Scopus SJR-0.034, SNIP-0.210,Scopus Indexed.
  • Prabhu.S, Vinayagam.B.K, Surface Analysis of LM25 Al Alloy /Multi Wall Carbon Nano Tube based Nanocomposite machining using Taguchi and Fuzzy logic analysis”, International Journal of the Physical Sciences, Accepted, September, 2012.Academic Journals,USA
  • Prabhu.S, Vinayagam.B.K, “Modeling the machining parameters of AISI D2 tool steel material with multi wall carbon nano tube in electrical discharge machining process using response surface methodology”,International Journal of the Physical Sciences, Vol. 7(2), pp. 297 - 305, 9 January, 2012.Academic Journals,USA.
  • Prabhu.S, Vinayagam.B.K, “A study on surface roughness in CNC lathe machining process using SAE20w40/MWCNT nanolubricants using regression analysis”, International Journal of Micro scale and Nano scale Thermal and Fluid Transport Phenomena (IJMNTFTP), Volume 2, no 3, Pp. 1-18, 2011. Issn: 1949-4955, Nova Science Publishers, USA.
  • Prabhu.S, Shubrajit Bhaumik, “Finite element modeling and analysis of zigzag and armchair type Single wall carbon nano tube”, Journal of Mechanical Engineering Research, Vol. 4(8), pp. 260-266, December 2012, Academic Journals, USA.
  • Shubrajit Bhaumik, S.Prabhu., “Extreme pressure property of Carbon Nano Tubes (CNT) based nanolubricant,” Journal of chemical engineering and Material science,Vol.4(8), pp.123-127, Dec.2013.
  • Shubrajit Bhaumik, S.Prabhu., Efficiency of Multiwall carbon nano tubes in nanolubricant,”Golden research Thoughts,Vol.2 (11), 2013, ISSN:2231-5063.
  • Prabhu.S, Anusha., Nimral Panda., “Analysis and optimization of Robot plasma coating efficiency using Taguchi and Regression analysis”, International Review of Applied Engineering Research (IRAER), Vol.3, No.1, Pp.67-79, 2013.ISSN :2248-9967.
  • Prabhu.S, Anusha., Nimral Panda., “Robot path planning for plasma coating”, International journal of systems, Algorithm & applications, Vol.3, May2013, Pp.92-95.,ISSN online:2277-2677.
  • Prabhu.S, Vinayagam.B.K, “AFM analysis of AISI D3 tool steel with multi wall carbon nano tube using Taguchi analysis, Manufacturing Technology Today, Volume 9, Issue 9-10,Sep-Oct 2010, pp 13-22,Issn:0972-7396.
  • Prabhu,S, Vinayagam.B.K, “Modeling the machining parameters of lapping process with single wall carbon nano tubes using response surface methodology”, Manufacturing Technology Today, Nanomachining, Volume 99, Issue 2, February 2010, pp 3-12.ISSN-0972-7396.
  • Prabhu,S, Vinayagam.B.K, “Development of empirical model for surface roughness during electrical discharge machining of AISI D2 Tool steel using Single wall carbon nano tubes”, International Journal of Computational Materials Science and Surface Engineering(IJCMSSE), Inderscience, Volume 4 ,No.1, 2011, pp 23-36, Scopus, SJR-0.029,SNIP-0.331,Scopus Indexed.
  • Prabhu,S, Vinayagam.B.K, “Analysis of nano surface finish using ELID  Technique with single wall carbon nano tubes: Nano trends: A journal of nano technology and applications, volume 8, issue 2,2010, pp 17-27.
  • Prabhu,S, Vinayagam.B.K, “Optimization of machining parameters of Die sinking EDM of AISI D2 Tool steel with Multi wall carbon nano tube using Taguchi Method”, International Journal of  Theoretical and Applied Mechanics  (IJTAM), ISSN 0973-6085, Vol.5, No.1, (2010) pp. 73–84.
  • Prabhu. S,Ellayaraja, Vinayagam.B.K, “Finite Element Modeling and analysis of Armchair Single Wall Carbon nano tubes”, International Journal of nanotechnology and application(IJNA),ISSN 0973-631X, Vol.4, No.2,(2010), Pp 87-94.
  • Prabhu,S, Vinayagam.B.K, “Analysis of surface characteristics of AISI D2 tool steel material using EDM process with Single wall carbon nano tubes”, International Journal of Engineering and Technology (IJET), Vol 2, No 1, 2010, Pp 35-41,Scopus Indexed.
  • Prabhu,S, Vinayagam.B.K, “An Analysis of surface characteristics of AISI D2 tool steel material using Electric Discharge Machining process with Single wall carbon nano tubes using regression analysis”, International Journal of Machining and Machinability of Materials (IJMMM), Inderscience publisher, Vol 10, Nos 1/2, 2011, Pp 99-119. Scopus SJR-0.034, SNIP-0.210, Scopus Indexed.
  • Prabhu,S, Vinayagam.B.K, “Effect of graphite electrode material on EDM of AISI D2 tool Steel with Multiwall carbon nanotube using Regression Analysis”, International Journal of Engineering Studies (IJES), Vol.1, No.2, (2009), pp. 81–92.
  • Prabhu,S, Vinayagam.B.K, “Analysis of nano surface generation of lapping process using Multi wall carbon nanotubes”, International Journal of Nano technology and Applications (IJNA), Vol.3, No.1, 2009, Pp 35-42.
  • Prabhu,S, Vinayagam.B.K, “An Optimization of EDM Machining process parameters with Multiwall carbon nanotube using regression analysis”, International Journal of Theoretical and Applied Mechanics (IJTAM), Vol.4, No.2, (2009), pp. 157–168. ISSN 0973-6085
  • Prabhu,S, Vinayagam.B.K, “Regression analysis of Electric Discharge Machining process Parameters using Multiwall carbon nanotube”, Manufacturing Technology Today, Vol.8, No.10, October 2009, Pp 3-16. ISSN-0972-7396.
  • Prabhu,S, Vinayagam.B.K, “Nanocoatings for engine application”, International Journal of Nano technology and Applications (IJNA), Vol.3, No.1, 2009, Pp 17-28.   
  • Prabhu,S, Vinayagam.B.K, ‘ Nano surface Generation of Inconel 600 material by grinding process using Single wall Carbon nano tubes”, International Journal of Nano technology and Applications (IJNA), Vol.3, No.1, 2009, Pp 7-16.   
  • Prabhu,S, Vinayagam.B.K, “A study on nano surface generation in Electric Discharge Machining process using multiwall carbon nano tubes”, International  Journal Nanoparticles (IJNP) Inderscience Publishers,2008,Vol 1 ,no 4, Pp 310-326.
  • Prabhu. S, “Production of multi wall CNT by arc discharge method”, Institute of engineers (IE) Journal, Matellurgical and materials engg, Vol. 2, Issue.1, Oct 2008. Pp 14-17. ISSN-0257-4411.
  • Prabhu,S, “Nano surface generation of grinding process using CNT with lubricant mixture”, International  Journal Nanomanufacturing (IJNM), Inderscience Publishers, Vol  3, No 1/2 , 2009, Pp 15-28. Scopus Indexed.
  • Prabhu. S, Vinayagam.B.K, “Nano surface generation in grinding process using Multiwall CNT with SAE20W40 Lubricant”, International Journal of Nanotechnology and Applications (IJNA), Volume2, Number2-3,2008.
  • Prabhu.S, Vinayagam.B.K, “Nano Surface Generation Using ELID Technique”, International Journal of Manufacturing Research (IJMR), Special Issue on “Advanced manufacturing Technologies, Inderscience Publishers, Vol. 4, Issue 2, 2009, Pp.137–153. Scopus Indexed, SJR- 0.039, SNIP-0.680.
  • Prabhu. S, Vinayagam.B.K, “Nano Surface Generation of AISI D2 Tool steel material using carbon nanotube in EDM Process”, International Journal of Engineering Research and Technology (IJER), Vol 1, No 1, 2008,Pp1-14.
  • Prabhu. S, Vinayagam.B.K, “Analysis of Surface Characteristics of AISI D2 Tool Steel Material Using Carbon Nano Tube”, International Journal of nanotechnology and application (IJNA),Vol.2,No.2-3, 2008.
  • Prabhu. S., “Surface texture analysis of machine tool condition monitoring using machine vision”, International Journal of Neural networks and Application (IJNNA), Vol 1, No1, Jan-July 2008, Pp 31-39.
  • Prabhu. S., “Design and analysis of john deer usa clutch hub using FEA”, International Journal of manufacturing science and technology(IJMST), Vol. 1, Issue.2,  June 2008, Pp 29-45.
  • Prabhu. S., “Production of carbon nanotube by electric arc discharge method”, International Journal of Nanosystem (IJNS), Vol. 1, Issue.1, Jan-June 2008.Pp 7-15.
  • Prabhu. S., “Stress analysis on Track Chassis using Finite Element Analysis”, International Journal of Mechanical Engineering (IJME), Vol1, Issue 1, June 2008. ISSN: 0974-5823.
  • Prabhu. S., “Design and Analysis of Gravity Feed Sago Roaster Fabrication”, International Journal of Applied Agricultural Research (IJAAR), Vol. 2, No. 1, 2007.
  • Prabhu. S., “Nano Surface Generation Using Electrolytic In-Process Dressing (ELID) Technique”, International Journal of Nanotechnology and Applications (IJNA), Vol. 1, No. 2, December 2007, pp. 45-59.
  • Bhalamruugan, R., Prabhu, S.,‘Performance characteristics analysis of automated robot spray painting using Taguchi method and Grey relational analysis’, is under review status in Arabian Journal of Science and Engineering – Springer, Impact factor 0.385. (ISSN: 1319-8025),April 2014.
  • Bhalamruugan, R., Prabhu, S.,‘Multi-Objective Optimization of performance characteristic analysis of Automated Painting using Taguchi and Fuzzy logic’, is under review status in Journal of the Brazilian Society of Mechanical Sciences and Engineering – Springer, impact factor 0.234. (ISSN: 1678-5878), April 2014.
  • Prabhu.S, Vinayagam.B.K, “Multi objective optimization of ELID grinding process using Grey relational analysis coupled with Principal component analysis” Advances in Mechanical Engineering, Accepted, In press, May 2014, Hindawi Publishing Corporation, Article ID 878510, Issn No.1687-8132,Impact factor 1.062.
  • Shubrajit Bhaumik, S.Prabhu, Kingsly Jeba Singh, “Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity”, Advances in Tribology, Hindawi Publishing Corporation, Volume 2014, Article ID 341365, Pp.1-8,http://dx.doi.org/10.1155/2014/341365.
  • Prabhu.S, Vinayagam.B.K, “ANFIS modeling of multi objective optimization of electrical discharge machining process using SWCNTs”, In press, 24th Feb 2014, Australian journal of Mechanical Engineering, Australia, Issn:1448-4846, Scopus SJR-0.162, SNIP-0.230.
  • Prabhu.S, Uma.M., Vinayagam.B.K, “Electrical Discharge Machining parameters optimization using Response Surface Methodology and Fuzzy Logic Modeling”, Journal of the Brazilian society of Mechanical Sciences and Engineering (JBSMSE), On line first, 22ndOctober, 2013, Issn:1678-5878, Springer Publication. Impact factor 0.234.
  • Prabhu.S, Vinayagam.B.K, “AFM Investigation in grinding process with Nanofluids using Taguchi Analysis”, International Journal of Advanced Manufacturing Technology, Issn: 0268-3768, Vol. 60, pp.149–160, 2012, Springer Publication, Impact factor 1.205.
  • Prabhu.S, Vinayagam.B.K, “AFM Surface Investigation of Inconel 825 with Multi Wall Carbon Nano Tube in Electrical Discharge Machining Process using Taguchi analysis”, Archives of Civil and Mechanical Engineering (ACME) journal, Vol.11, Issue 1, 2011,pp.149-170,online available 18th may 2012, Impact factor 0.963, Elsevier.
  • Senthilkumar.R, Prabhu.S, Cheralathan.M., “Experimental Investigation on CNTs Coated Brass Rectangular Extended Surfaces,” Applied Thermal Engineering, Vol. 50, 2013, Pp.1361-1368. Elseiver, Impact factor 2.127.
  • Prabhu,S, Vinayagam.B.K, “Nano Surface generation of grinding process using carbon nano tubes”, Sadhana Vol.35, Part 6, December 2010, pp. 747–760, Springer Publication, Impact factor 0.393.
  • Prabhu.S, Vinayagam.B.K, “Fractal Dimensional surface analysis of AISI D2 tool steel material with nanofluids in grinding process using Atomic force microscopy”, Journal of the Brazilian society of Mechanical Sciences and Engineering (JBSMSE), Vol.XXXIII, No. 4 , pp. 459-466, Oct-Dec 2011,Issn:1678-5878, Impact factor 0.234.
  • Prabhu.S, Vinayagam.B.K, “Analysis of Surface characteristics by Electrolytic In-process Dressing (ELID) Technique for Grinding process using Single wall carbon nano tube based nanofluids”, Arabian Journal for Science and Engineering (AJSE), Vol.38, No.5, Pp 1169-1178, 2013, Issn: 1319-8025, Springer Publication, Impact factor 0.385.
  • Prabhu.S, Vinayagam.B.K, “AFM nano analysis of Inconel 825 with Single Wall Carbon Nano Tube in Die Sinking EDM Process using Taguchi Analysis”, Arabian Journal for Science and Engineering (AJSE), Vol.38, No.6, Pp 1599-1613, June 2013, Issn: 1319-8025, Springer Publication, Impact factor 0.385.
  • Senthilkumar.R, Prabhu.S, Nandhakumar.A.J.D, “Natural convective heat transfer of nano coated aluminium fins using Taguchi method,” Online first, 14th August 2012, Heat and Mass Transfer (HMT), Springer, Impact factor 0.840.
  • Prabhu.S, Uma.M., Vinayagam.B.K, “Adaptive Neuro Fuzzy Interference System modeling of Carbon nanotube based Electrical Discharge machining process”, Journal of the Brazilian society of Mechanical Sciences and Engineering (JBSMSE), Vol.35, November 2013, Issue 4, pp. 505-516. Issn:1678-5878, Springer Publication. Impact factor 0.234.
  • Prabhu.S, Vinayagam.B.K, “Multi objective optimisation of SWCNT based Electrical Discharge Machining process using Grey relational and Fuzzy logic analysis”, International Journal of Machining and Machinability of Materials (IJMMM), Vol.13, No.4, Pp.439-463, 2013. Inderscience publisher, Scopus SJR-0.034, SNIP-0.210.

International Conference

  • Thuskar.T, Prabhu.S, “Performance characteristics analysis of IRB1410 robot using Nanopaints”, International conference on Engineering Technology and Science,(ICETS16), March 18-19th 2016, Muthyammal Engineering college, Rasipuram, Tamilnadu, India.
  • Shubrajit Bhaumik., Prabhu.S., “Carbon nanotube – A new generation nano additive for lubricants”, ASIATRIB 2014 International Conference, presented, Agra, India, Feb 17-20, 2014-Paper no.-TS1914503.
  •  Prabhu.S, Vinayagam, B.K, “Grey relational and fuzzy logic analysis of Multi wall carbon nano tube based Electrical Discharge Machining process”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, accepted, IMECE2012,November 9-15, 2012, Houston, Texas, USA.
  •  Prabhu.S, Vinayagam, B.K, “Analysis of Multi wall carbon nano tubes based nanocomposite using Taguchi analysis in grinding process”, 98th Indian Science Congress (ISC) , SRM Institute of Science and Technology (formerly known as SRM University), Chennai, Jan 3-7, 2011,Material Science, No 6, Pp 5.
  •  Prabhu.S, Vinayagam, B.K, “Multi wall carbon nano tube reinforced LM6 aluminium nanocomposite machining using Taguchi analysis”, Process and characterization of advanced nanostructured materials, ISBN-023-033-199-8, International conference on nanomaterials and nanotechnology, NANO2010, 13-16 December, Pp 119-124. 2010, K.S.Rangasamy college of Technology, Trichengodu, Tamilnadu, India.
  •  Prabhu.S, R.Murugesan, Vinayagam, B.K , “Empirical model on Surface finish of super finishing process using micro powders with regression analysis”, International Conference on Advances in Industrial Engineering Applications (ICAIEA2010),January 6-8, 2010, College of Engineering Guindy Campus, Anna University Chennai, India,Pp 107.
  •  Prabhu.S, Vinayagam, B.K, “Nano surface generation of lapping process using Multi wall       carbon nanotubes”, ICMIE 2009, International Conference on Mechanical and Industrial       Engineering, September 23-25, 2009, Amsterdam, Netherlands.
  •  Prabhu, S., “carbon nanotube manufacturing”, International conference on sensors and related networks, Sennet07, Dec 2007, VIT, Vellore, India, Pp CGS18.
  •  Prabhu, S., “Production of CNT by Electric Arc Discharge Process”, Pan Pacific Micorelectronics Symposium and Table Top Exhibition, Jan. 22-24, 2008, Edina, MN 55424, USA, 2008.
  •  Prabhu, S., “Design and Analysis of John Deere USA Clutch Hub”, Pan Pacific Micorelectronics Symposium and Table Top Exhibition, Jan. 22-24, 2008, Edina, MN 55424, USA, 2008.
  •  Prabhu, S., “Nano Surface Generation using ELID Technique”, International Conference on Total Engineering Analysis on Manufacturing Technologies,  4-6th October 2007, IISC Bangalore , 2007, pp. 61.
  •  Prabhu, S., “Production of Carbon Nanotube by Electric Arc Discharge Method”, Accepted for publication in Multiphysics 2007, Conference, Dec. 12-14, 2007, Manchester, UK, 2007.
  •  Prabhu, S., “Production of CNT”, Accepted for Publication in Virtual Conference on Nanoscale Science and Technology, VC-NST, Oct. 21-25, 2007, University of Arkansa, USA, 2007.
  •  Prabhu, S., “Micro Controller Based Automatic Drilling Machine”, Sixth International Conference on High Temperature Ceramic Matrix Composites HTCMC06, September 2007, India habitat center, New Delhi, 2007.
  •  Prabhu, S., “The Recent Trends in Carbon Nanotubes”, International Conference CPIE 2007, March 24th, 2007, NIT, Jalandar, India, 2007.
  •  Anusha.V.,Prabhu.S., “Robot path planning for plasma spray coating”, 2nd International conference on recent advances in Science and Engineering, ICRASE, April, 29-30, 2013, Pp-92-97,ISBN-9297-97881-923541-07.
  •  Paraswajinam.C.,Prabhu.S., “Design and surface characteristics analysis of nano Iron”,International conference on computational Intelligence and advanced manufacturing Research, ICCIAMR,2013,5-6th April 2013, Vels University, Chennai,Pp.129.ISBN-97881-924031-7-5.
  •  Shubrajit Bhaumik , S.Prabhu, “Finite Element Modeling and analysis of Zigzag type Single Wall Carbon nano tubes”, 98th Indian Science Congress (ISC) , SRM Institute of Science and Technology (formerly known as SRM University), Chennai, January 3-7, 2011, Engineering Science, No 51,Pp 100.
  •  Shubrajit Bhaumik., Prabhu.S.,Padmanabhan., “Triboligical behavior of MWCNT based synthetic oil”,International conference on Engineering materials and processes, ICEMAP-2013, 23-24th May 2013, Tagore engineering college, Chennai,Pp.41.

National Conferences

  • Ambigai.R, Prabhu.S, “Friction and wear behavior of Al based nano Si3N4 and graphite composite”, presented in Research day held on 29th Feburary 2016, at SRM Institute of Science and Technology (formerly known as SRM University),Chennai.(Silver Medal)
  • Thuskar.T, Prabhu.S, “Performance characteristics analysis of IRB1410 robot using Nanopaints”, presented in Research day held on 29th Feburary 2016, at SRM Institute of Science and Technology (formerly known as SRM University),Chennai.(Silver Medal)
  • Prabhu.S, Vinayagam, B.K, “Optimization of nanocoated wire cut electrical discharge machining process using Taguchi Fuzzy logic based approach”, National conference on Modeling, simulation and optimization, 2nd November 2012, Vels University, Chennai, Pp.117.(Received Best paper Award).
  • Prabhu.S, Vinayagam, B.K, “Multi objective optimization of Multi Wall Carbon Nano Tube based Grinding Process using Grey relational Analysis”, National conference on Advancement and recent innovation in Mechanical Engineering(ARIME 2012), April 20, 2012, Easwari Engineering college,Chennai, Pp.54.
  • Prabhu.S, Charan Teja Kovi, “Finite element analysis of AISI D2 Tool Steel material in Grinding process using nanofluids”, National Conference on Recent Research in Mechanical Engineering(RRME’11), Adhiparasakthi Engineering College, Melmaruvathur, Tamilnadu, 05 May 2011,Pp 385-390.
  • Prabhu.S, Shubrajit Bhaumik, “Finite Element Analysis of Armchair Type Single Wall Carbon Nanotube”, National Conference on Recent Research in Mechanical Engineering (RRME’11), Adhiparasakthi Engineering College, Melmaruvathur, Tamilnadu, 05 May 2011,Pp 352-358.
  • Prabhu.S, Shubrajit Bhaumik ,  “Finite Element Approach for Investigation of Mechanical Property of Zigzag Type Carbon Nano Tube”, National Conference on Emerging Research and Advances in Mechanical Sciences (ERA 2011), 23rd March 2011,Velammal Engineering college, Chennai, Pp 33-37.
  • Prabhu.S, Vinayagam, B.K., “AFM Surface Investigation of Inconel 825 with Multi Wall Carbon Nano Tube in Electrical Discharge Machining Process using  Taguchi Analysis”, National conference on research perspectives in  Mechanical Engineering(REPMEC-2011)”, Sri Venkateswara college of engineering, Chennai, 1-2nd April, 2011, Pp 16.
  • Prabhu.S, Vinayagam, B.K., “Nano Surface Generation of EDM Process using Nano Materials”, National conference on Recent Trends in Manufacturing Technology, RTMT 2011, Anna university, Chennai, 11-12th March 2011,Pp 21.
  • Prabhu.S, Shubrajit Bhaumik ,  “ Analysis of  Young’s modulus of single wall carbon nano tube by FEM”, National conference on Advances and innovation in Mechanical engineering, AIME-2011,SKR Engineering College, Chennai-123,Pp1-5.
  • Prabhu.S, Vinayagam, B.K., “Analysis of surface characteristics of AISID2 tool steel material in EDM  process using Taguchi analysis”, National Conference on Emerging Research and Advances in Mechanical Sciences (ERA 2011), 23rd March 2011, Velammal Engineering college, Chennai, Pp 97-104.
  • Prabhu.S, Subhanh,Vinayagam, B.K.,  “Taguchi Method based optimization of Nano coating on cutting tool with En 24 Steel material ”, National Conference on Advanced Forming Technology(AFT-2010),15-16, April,2010,R.V.college of Engineering, Bangalore, No 102,Pp 1.
  • Prabhu.S, Vinayagam, B.K, “A study on AISI D2 Tool steel material with single wall carbon nano tubes In EDM Process using regression analysis method", accepted in National Conference on Advanced Manufacturing Techniques (NCAMT2009).Dec 2009.
  • Prabhu.S, Vinayagam, B.K, “Surface finish of grinding process using Electrolytic in-process dressing Techniques with Single wall carbon nano tubes”, published in National Conference on Excellence in New Technologies in Mechanical Engineering – ENTIME- 2009, Dec 2009.
  •  Prabhu.S., “The application of nanotechnology in nanocoatings”, National conference on recent trends of mechanical engineering, Jan 24th 2007, at Hindustan college of engg, Agra,India,Pp92.
  • Prabhu, S., “Challenges in Micro/Nanotechnology”, National conference on RTME2007, Feb. 10th, at Saranathan College of Engineering, Trichy, 2007.
  • Prabhu, S., “The CMM Form Error Evaluation”, National Conference on Emerging Trends in Thermal Engineering, Competitive Manufacturing & Management, TECM 2007, St. Joseph college of Engineering, Chennai, Jan. 30th, 2007.
  • Prabhu, S., “The AFM Application in Nanotechnology” National Seminar on Nanoscience and Nanotechonology, “Nanoworld2007”, Seethlakshmi Ramasamy College ,Trichy, India, Jan. 4th -5th, 2007.
  • Prabhu, S., “The Recent Trends of Nanotechnology in Manufacturing” National conference on Recent Trends in Mechatronics, Nanotechnology & Robotics, RTMNR, NIT, Rourkela, Orissa, India, April 15-16, 2006.
  • Palani Ganesa chakravarthy.C.S., Prabhu.S., “Design and analysis of process parameter optimization of Wire cut Electrical Discharge Machining”, Proceeding of National conference on innovation in mechanical engineering (NCIME’13),10th April, 2013,Gojan school of business and Technology, Chennai, Pp 35-45.
  • Palani Ganesa chakravarthy.C.S., Prabhu.S., “Optimization of surface roughness of wirecut Electrical Discharge Machining processes using Neural networks”, Proceedings of National conference on Advances in Materials, Design & Manufacturing (AMDM 2013), 7th April 2013, B.S.Abdur Rahman University, Chennai, Pp-14-21.
  • Loganathan.K.,Prabhu.S., “Mixing of CNTs and aluminium powder for powder metallurgy use”, National conference on advances in Mechanical Engineering, NCAME’13,25th April, 2013,Sairam Engineering college,Chennai, Pp.32.
  • Paraswajinam.C., Prabhu.S., “Experimental Investigation on surface characteristics of Nano Iron”, National conference on advances in Mechanical Engineering, NCAME’13,25th April, 2013,Sairam Engineering college,Chennai, Pp.36.
  • Vinoth kumar.P., Prabhu.S., “Design and fabrication of vaccum gripper”,National conference on recent advances in design, applications and Manufacturing systems,RADAMS’13, Thanthai periyar Govt.Institute of Technology, Vellore, April 18, 2013, Pp 94-98.
  • Anusha.V.,Prabhu.S.,Nirmal panda., “Feature  and form based robot programming using plasma coating”,Proceedings of National conference on emerging trends in engineering applications, 3rd April, 2013,Hyderabad, Pp.9-12.
  • Anusha.V.,Prabhu.S.,Nirmal panda., “Robot plasma coating of Alumina-Titania deposition using optimizing techniques” Proceedings of National conference on Advances in Mechanical engineering and renewable energy, 24th April,CBIT,Hyderabad.,Pp.192-196.

 

Conferences/Seminars/Workshops Attended

  • A National level Workshop “Nanomaterials and nanomanufacturing” participated in St. Joseph’s college of engineering, Chennai, 10th August 2007.
  • A “Basic Robot training programme” was attended in ABB Robot, Bangalore, 9-15th December 2007.
  • A national level workshop “Nano materials” participated in NIT, Trichy, 5-6th march 2008.
  • A National level Workshop “Engineering Materials and applications” participated in Vinayagamission University, Chennai, 2-3rd December 2009.
  • A National level Workshop on “Application of Taguchi method for Research Simplification” participated in SSN College of engineering, Chennai, 19th Feburary 2010.
  • A National level Workshop on “Application of Optimization Techniques In Engineering Solutions” participated in Sri Ramakrishna Engineering College, Coimbatore, 13th March 2010.
  • A National level Workshop on “Nanomaterials” participated in Sri Venkateswara College of Engineering, Sriperumputhur, Chennai, 21st August 2010.

Working Papers

  • S.Prabhu, S.Oliver nesa raj, “Modeling and analysis of Titanium alloy in Wire-cut EDM using Grey Relation coupled with Principle Component Analysis”, Australian journal of Mechanical Engineering, Taylor & Francis, Under revision, May 2016, Scopus Indexed.
  • S.Prabhu, R.Ambigai, “Optimization of frictio and wear behaviour of Al-Si3N4 Nano composite and Al-Gr-Si3N4 Hybrid composite under dry sliding conditions” Transaction of Nonferrous metal society of china,Elsevier, Under review, May 2016, Impact factor-1.178.
  • S.Prabhu, R.Ambigai, “Experimental Analysis of Tribological behavior of Al-B4C Nanocomposite”, Australian journal of Mechanical Engineering, Taylor & Francis, Under revision, May 2016, Scopus Indexed.
  • S.Prabhu, S.Oliver nesa raj, “Adaptive Neuro-Fuzzy interference system modeling of EDM process using CNT infused Copper Electrode”, International Journal of Machining and Machinability of Materials (IJMMM),UK,Inderscience, May 2016, Scopus Indexed.
  • S.Prabhu,Jinju Joseph, “Image Processing based Simulink Model and Analysis of Mobile Modular Fixture Robot”, The Archive of Mechanical Engineering, Under review, Scopus Indexed, June 2016.
  • S.Prabhu, Anusha, “Optimization of Robot plasma coating efficiency using Genetic Algorithm and Neural Networks “,Journal of Mechanical Engineering,Malaysia, Under revision, Scopus Indexed, June 2016.
  • S.Prabhu, B.K.Vinayagam, “Taguchi and Expert system based prediction of surface roughness using Carbon nanotube TMT Nanosteel”, Journal of Advances in manufacturing system, Under preparation, June 2016.

 

Work in Progress

  • Design and analysis of mechanical properties of nano Aluminium 6061 alloy
  • Design and surface characteristic analysis of nano steel
  • Analysis of MWCNT/ TMT Seel  nanocomposites using Taguchi fuzzy logic analysis
  • Analysis of CNT/FE415 steel nanocomposites using Taguchi analysis in CNC lathe process
  • Analysis of cryo treated D2 tool steel material in surface grinding operation with carbon nano tubes grinding wheel using taguchi method
  • Analysis of CNT/AISI D2 Tool steel nanocomposites using Taguchi neural network analysis
  • AFM surface investigation of AISI D2 Tool Steel with multi wall carbon nano tube based copper nanoelectrode in electrical discharge machining process using Taguchi analysis
  • Nano surface generation of grinding process using carbon nano tubes based grinding wheel with Electrolysis in-process dressing (ELID) technique
  • Analysis of CNT/LM24 aluminum nanocomposites using response surface methodology in CNC grinding process

Guest Lectures Given

  • Guest Lecture given on the topic “ Application of nanofluids in Machining” to A National seminar on application of nanofluids in mechanical engineering, 15-16 March, 2011, K.S.Rangasamy college of Technology, Trichengodu, Tamilnadu, India.
  • Guest Lecture given on the topic “Robotics” to Gojan School of Business and Technology, 21st July, 2012, Redhills, Chennai, Tamilnadu, India.
  • Lecture given on the topic “Applications of Nanotechnology in Mechanical Engineering” to School of Mechanical Engineering, SRM Institute of Science and Technology (formerly known as SRM University), 2010.
  • Guest Lecture given on the topic “Recent trends in Robotics” to ARM College of Engineering and technology, 3rd Feburary 2014, Chennai, Tamilnadu, India.
  • Acted as Chair for National conference on Recent Trends in Mechanical Engineering (RTME) at Valliammai Engineering College, Chennai, India, on 9th April 2014.
  • Guest Lecture given on the topic “Recent trends in Robotics and its Engineering applications” to Aaruush Technical Talk at SRM Institute of Science and Technology (formerly known as SRM University), on 15th July 2015, Chennai, Tamilnadu, India

Academic Experience

  • Professor & Head of the Department, Department of Mechanical Engineering, Kattankulathur Main Campus, SRM Institute of Science and Technology (formerly known as SRM University), Chennai, Tamilnadu, India from February 2016 to Till date (6 Months
  • Professor  & In-charge for Final year Department of Mechanical Engineering, Kattankulathur Main Campus, SRM Institute of Science and Technology (formerly known as SRM University), Chennai, Tamilnadu, India from January 2014 to January 2016 (2 years).
  • Assistant Professor (S.G), School of Mechanical Engineering, SRM Institute of Science and Technology (formerly known as SRM University), Chennai, India, July 2012 to December 2013 for the period of 1.6 Years,
  • Assistant Professor(Sr.G),School of Mechanical Engineering, SRM Institute of Science and Technology (formerly known as SRM University), Chennai, India,July 2012 to till date
  • Assistant Professor (Sr.G), School of Mechanical Engineering, SRM Institute of Science and Technology (formerly known as SRM University), Chennai, India, April 2005 to July 2012
  • Lecturer, School of Mechanical Engineering, SRM Institute of Science and Technology (formerly known as SRM University), Chennai, India, July 2001 -April 2005.

Other Professional Experience

  • Appointed as a Doctoral Committee (DC) Member for Vel’s University, Chennai from April 2014.
  • Appointed as a Doctoral Committee (DC) Member for Bharath University, Chennai from February 2015.
  • Appointed as a Doctoral Committee (DC) Member for Anna University, Chennai from March 2016
  • Recognized Ph.D Supervisor of SRM Institute of Science and Technology (formerly known as SRM University), Chennai from 24.08.2015.
  • Recognized Ph.D Supervisor of PHAER University, Udaipur, Rajasthan from 12.12.2014.
  • Robot Gripper design for pick and place applications for Mahindra and Mahindra, Chennai, Period: July 2012-May 2013.
  • Robot error analysis on mouse component using Rapid programming language for Sanmina India Ltd, Chennai, Amount received Rs.50, 400/- Period: Jan-June 2012.
  • Production engineer in Muthukumar Engineering Works, Salem, Tamilnadu, India, from June 1996 to May 1999
  • The ABB robot training programme was Conducted for  FORD company employees for 2 weeks in Dec 2008
  • Reviewer for Archives of Civil and Mechanical Engineering journal, Elsevier Publications, from Nov 2011.
  • Reviewer for Arabian Journal for Science and Engineering, Springer Publications, from Nov 2011, Rs 6000/-.
  • Reviewer for IEEE Transactions on Robotics & Automation Society Journal, from Dec’2009.
  • Reviewer for Journal of Mechanical Engineering Research (JMER), Academic journals, from Jan’2010.
  • Reviewer for Journal of Fullerenes, Nanotubes and Carbon Nanostructures, Taylor and Francis from Jan’2012.
  • Reviewer for Journal of engineering and Manufacture, Sage Publication from Jan’2013.
  • Reviewer for American Journal of Materials Science, Scientific & Academic Publishing from May’2012 to May 2013.
  • Reviewer for Technical paper presentation of AARUSH 13 symposium, SRM Institute of Science and Technology (formerly known as SRM University), 2013.
  • Reviewer for Measurement Journal, Elsevier, from Feb’2014.
  • Reviewer for Neural computing and Applications, Springer publication, from March 2015..
  • Completed the Coursera certified online course on the subject “Nanotechnology: The Basics” from Rice University with Distinction 3rd Feb. 2014.
  • Completed the Coursera certified online course on the subject “Fundamentals of Fluid power” from University of Minnesota's 9th Dec. 2014
  • As a Convener, conducted a “National conference on Advances in Mechanical Engineering, NCAME2016, April 29th 2016.
  • As a Coordinator, conducted a Two days short course on “Mechanics of Composite materials and structures” MCMS 2015, Dec 21-22, 2015.
  • As a Coordinator, conducted a One day workshop on “Development Manufacturing and analysis of Advanced Composites” DMAAC 2015, Dec 19, 2015.
  • International Conference on “International conference on Advanced Manufacturing Engineering” ICAME’06 (Dec11-14th 2006)
  • International Conference on “Asian Symposium on Visualization” ASV 2010, (March 1-3rd 2010)

Achievements and Awards:

  • Received Silver Medal for presentation of  paper titled “Friction and wear behavior of Al based nano Si3N4 and graphite composite”, presented in Research day held on 29th February 2016, at SRM Institute of Science and Technology (formerly known as SRM University), Chennai..      Received Silver Medal for presentation of  paper titled “Performance characteristics analysis of IRB1410 robot using Nanopaints”, presented in Research day held on 29th February 2016, at SRM Institute of Science and Technology (formerly known as SRM University), Chennai
  • Received “Best Teacher award” from SRM Institute of Science and Technology (formerly known as SRM University) in the Year 2006 Rs 2500/-.
  • Received “Best Project award” from School of Mechanical Engg, SRM Institute of Science and Technology (formerly known as SRM University) in the year 2007, Rs 2000/-.
  • Received “Best Paper Award” among 148 papers from National conference on Modeling, simulation and optimization held in Vels University, Nov 2012.
  • Received “Best poster presentation award” among 17 posters in M.Tech project poster presentation competition at SRM Institute of Science and Technology (formerly known as SRM University), May 2013.
  • Received award from SRM Institute of Science and Technology (formerly known as SRM University) in Teachers day functions 5th September 2011 for my research publication Rs 8000/.
  • Received award from SRM Institute of Science and Technology (formerly known as SRM University) in Teachers day functions 5th September 2012 for my research publication Rs 5500/.
  • Received award from SRM Institute of Science and Technology (formerly known as SRM University) in Teachers day functions 5th September 2013 for my research publication Rs 7300/.
  • Received award from SRM Institute of Science and Technology (formerly known as SRM University) in Teachers day functions 5th September 2014 for my research publication Rs 4600/.
  • Received award from SRM Institute of Science and Technology (formerly known as SRM University) in Teachers day functions 5th September 2015 for my research publication Rs 70,000/.

Memberships

  • ISTE-Life membership No-LM31434
  • IACSIT-International Association of computer science and information technology Life member no.-80348508
  • IAENG International Association of Engineers-Life member no.: 141059
  • IET (Institute of Engineering and Technology) Life member No.:1100388677 on 16th June 2015.
  • Indian Science Congress Association, Kolkata, Life member- A3610

 

 

Mr.C.Prabhu
Mr.C.Prabhu

Assistant Professor (Sr.G.)

Area:Thermal Engineering
E.mail:: prabhu.c@ktr.srmuniv.ac.in
Affiliation: Department of Automobile Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University)

Education

Ph.D Alternate fuels Anna University, pursuing
M.E Thermal Engineering Annamalai University, 2003.
B.E Mechanical Engineering(Drive modification of  Hydraulic Power Steering system for Heavy vehicles) Annamalai University, 2001

Other Details:

Courses:

  • Applied Thermal Engineering
  • Automotive Engine Systems
  • Alternate fuels and Emission Control
  • Automotive Engines

Research Interests

  • Fuel Chemistry
  • Biofuels
  • Diesel Engine Technology

Selected Publications

  • Experimental Investigation to Study the Effect of Properties of Coconut Oil Biodiesel and Castor Oil Biodiesel and its Blending with Diesel on the Performance in a CI Engine, SAE Technical Paper 2016-28-0145, 2016, doi:10.4271/2016-28-0145 

Papers Presented

  • Experimental Investigation of Performance, Combustion and Emission Characteristics of Diesel Engine using pre heated Rubber seed oil, ICONICE – 2007, JNTU, Hyderabad.-International
  • Use of Glow Plug in Non-Edible Vegetable Oil fuelled Diesel Engine, LCTA-2009, Annamalai University.
  • Experimental Investigations of the Performance of Karanja oil – Hydrogen Dual Fuel Engine, Bapuji Institute of Engg. & Technology, Karnataka.2010
  • Optimisation of Inlet Manifold for Multicylinder Engines using CFD, Defence Institute of Advanced Technology, Pune,2011.
  • A comparative study on hydrogen induction in karanja and rubber seed oil fuelled diesel engine, 23rdNational Conference on I. C. Engine and Combustion (NCICEC 2013),SVNIT ,Surat ,2013
  • Experimental Investigation of the Performance and Emission Characteristics of Grape seed oil biodiesel and Grape seed oil biodiesel – ethanol blend in a CI Engine , 24rd National Conference on I. C. Engine and Combustion (NCICEC 2015), University of Petroleum and Energy Studies(UPES), Dehradun, India,2015

Conferences/Seminars/Workshops Attended:

  • National Level Technical Seminar on “Recent Trends in Automotive Electronics”, sponsored by SAEINDIA
  • Automotive R&D Trends 2015, organized by Tamilnadu Technology Development & Promotion Centre and Confederation of Indian Industries (CII)
  • An insight to the implementation of Renewable energy resources for self sustainability, in private colleges, organized by the “Tamilnadu Energy Development Agency” (TEDA)
  • 3 days International Conference and Exhibition on Fluid Power Technology, IIT Madras
  • Recent Developments in Hydrogen Engines” sponsored by AICTE
  • New Trends in Electrification and Legislation, Powertrain Trends - Hybrid & EV , AVL India Pvt Ltd.

Working Papers

  • Characterisation and evaluation of physio- chemical properties of grape seed methyl ester using predictive correlations and experimental analysis for compression ignition engine application ,2016 

Academic Experience:

  • Senior Lecturer, KCG College of Technology, 2004-2012
  • Visiting faculty, Associate Membership of Aeronautical Society of India (AMAeSI), 2008.

Training’s attended (2009 - 2013)

  • Short term training on “Technologies for Modern Diesel Engine Development”, IITM
  • Nanotechnology Sensitization Programme (6 months certificate course) – Nano Science & Technology Consortium (NSTC), Pune
  • Hands on Nano Lab – A hands on Training Programme on Electron Microscopy and Atomic Force Microscope by NSTC, Pune and Fore Vision Analytical Instruments, Hyderabad.
  • Proficiency Improvement Programme on” Automotive Fuels and emission “ ,Automotive Research Association of India “ (ARAI)

Awards & Achievements: 

  • Bestowed with the Best Teaching awards four times since 2004 till 2011

Membership in Professional Societies:

  • Life member, Indian Society for Technical Education,ISTE ,2006
  • Member SAE (India) –“ Society of Automotive Engineers “-2012
  • Member IET ,The Institution of Engineering and Technology-2015
 

 

 

prabhu_sekar

Dr. R. Prabhu Sekar

Assistant Professor
Area: Machine Design

Emailprabhusekar.r@ktr.srmuniv.ac.in

Affiliation: Department of Automobile Engineering, Kattankulathur Campus, SRM Institute of Science and Technology (formerly known as SRM University).
 

Education
Ph.D. Asymmetric Gear design, FEA  IIT Madras, 2015
M.E. Engineering College of Engineering, Guindy campus, Anna University, Chennai, 2009
B.E. Engineering Thirumalai Engineering college , Kanchipuram, Madras University, Chennai, 2003

Other Details:

Courses

  • Design of Automotive Components
  • Stress analysis of machine components
  • Wear and crack study

Research Interests

  • Stress analysis on Machine components using FEA

Selected Publications 

  • R.Prabhu Sekar, Edvin Geo.V and Leenus Jesu Martin, “A Mixed Finite Element and analytical method to predict load, mechanical power loss and improved efficiency in non-standard spur gear drives”, Journal of Engineering Tribology, Part J, IMECHE,SAGE Publisher – 2017(Accepted for publication)(Impact factor -0.95).
  • R.Prabhu Sekar and G.Muthuveerappan, “Estimation of tooth form factor and stress correction factor for non-standard symmetric spur gears”, IEEE XPLORE -2017 (Accepted for publication).
  • R. Sathishkumar, R.PrabhuSekar and A. Arulmurug, “Estimation of wear depth on normal contact ratio spur gear”, Middle East Journal of Scientific Research, vol. 24 (2016), pp. 38-42.
  • R.Prabhu Sekar and G.Muthuveerappan, “Estimation of tooth form factor for normal contact ratio asymmetric spur gears”, Mechanism and Machine Theory, Elsevier, vol. 90, (2015), pp. 187-218. (Impact factor -1.689).
  • R.Prabhu Sekar and G.Muthuveerappan, “Load sharing based maximum fillet stress analysis  of Asymmetric helical gears designed through direct design – a parametric study”,  Mechanism and Machine Theory, Elsevier, vol. 80, (2014), pp. 84-102. (Impact factor -1.689).
  • R.Prabhu Sekar and G.Muthuveerappan, “ A Balanced Maximum Fillet Stresses on Normal Contact Ratio Spur Gears to Improve the Load Carrying Capacity through Non-Standard Gears”, Mechanics based design of structure and machines, Taylor and Francis, vol. 43, (2014), pp. 150-163. (Impact factor -1.508).
  • R.Prabhu Sekar and G.Muthuveerappan, “ Load sharing based fillet stress analysis of involute helical gears”, Applied Mechanics and Materials, Trans Tech, vol. 465, (2014), pp. 1234-1238 (Impact factor -0.3).
  • R.Prabhu Sekar and G.Muthuveerappan, “Effect of backup ratio and cutter tip radius on uniform bending strength design of spur gears”, Procedia Material Science, Elsevier, vol. 5, (2014), pp. 1640-1649.
  • R.Prabhu Sekar and G.Muthuveerappan, “ Effect of face contact ratio on load sharing based fillet stress in asymmetric helical gear drives”, Universal Journal of Mechanical Engineering, Horizon, vol. 2, (2014), pp. 137-141..

Papers Presented

  • R.Prabhu Sekar and G.Muthuveerappan, “Estimation of tooth form factor and stress correction factor for non-standard symmetric spur gears”, International conference on Design and Manufacturing -2016, ICONDM (Dec-18-19) 2016 , IIITDM, Chennai.
  • Satheesh kumar, R.Prabhu Sekar, “Estimation of wear depth on Normal contact ratio spur gear”, International Conference on Recent trends in Engineering and Technology 2016, April 28-29, St. Joseph’s college of Engineering, Chennai.
  • Balachandar, R.Prabhu Sekar, “Determination of wear on non-standard symmetric spur gear”, International conference on Advances in Mechanical Engineering 2016, April -29, SRM Institute of Science and Technology (formerly known as SRM University) Chennai.
  • R.Prabhu Sekar, G.Muthuveerappan, “Effect of Face Contact Ratio on Load Sharing Based Fillet Stress in Asymmetric Helical Gear Drives”, 1st International Conference on Mechanical Engineering: Emerging Trends for Sustainability (IC MEETS 2014), Jan 29-31, MANIT Bhopal.
  • R.Prabhu Sekar, G.Muthuveerappan, “Effect of backup ratio and cutter tip radius on uniform bending strength design of spur gears”,  International Conference on Advances in Manufacturing and Materials Engineering (AMME 2014), March 27-29, NIT Surathkal.
  • R.Prabhu Sekar, G.Muthuveerappan, “Load Sharing Based Fillet Stress Analysis of Helical Gears with Higher Pressure Angle and Backup Ratio”, 3rdInternational Conference on Material for the Future – Innovative materials, Process, Products and Applications (ICMF – 2013), Nov 6-8, Govt. Engineering College, Thrissur, Kerala.
  • R.Prabhu Sekar, G.Muthuveerappan, “Load sharing based fillet stress analysis of involute helical gears”, 4thInternational Conference on Mechanical and Manufacturing Engineering 2013 (ICME 2013), Dec 17-18, Universiti Tun Hussein Onn Malaysia.
  • R.Prabhu Sekar, G.Muthuveerappan, “Load Sharing Based Fillet Stress Analysis of Symmetric and Asymmetric Helical Gears Designed through Direct Design”, International Conference on Computer Aided Engineering (CAE 2013), Dec 19-21, IIT Madras.
  • R.Prabhu Sekar and S.Gowri, “Development of flexible finger joint implant”, National conference on A Confluence of Design and Manufacturing Engineers, (ACDME-2009) April -11, GKM College of Engineering, Chennai.

Working Papers

  • R.Prabhu Sekar and Sathishkumar. R, “Enhancement of Wear Resistance on Normal Contact Ratio Spur Gear Pairs through Non-Standard Gears”, Wear - Elsevier (Revised manuscript submitted) (Impact factor -2.33).
  • R.Prabhu Sekar and G.Muthuveerappan, “A balanced fillet stress on asymmetric spur gear to improve the bending load capacity through addendum modifications”, Brazilian Society of Mechanical Sciences and Engineering, Springer (Under review) (Impact factor -0.95)

Work in Progress

  • R.Prabhu Sekar , “Study of Gear Performance on Normal Contact Ratio Asymmetric Spur Gear Pairs”, (To be communicated).
  • R.Prabhu Sekar and Ravi Varma , “Enhancement of Wear Resistance on High Contact Ratio symmetric and Asymmetric Spur Gear Pairs”, (To be communicated).

Academic Experience

  •  Assistant Professor, Department of Automobile Engineering, SRM Institute of Science and Technology (formerly known as SRM University), Chennai. 2015-till date
  • Senior Lecturer, Department of Mechanical Engineering, KCG College of Technology, Chennai.
    2009-2010.
  • Lecturer, Nanjappa polytechnic college, Coimbatore. 2006-2007.

Other Professional Experiences

  • Quality control Engineer, Auto Die Casting company, coimbatore, 2003-2006.

Conferences/Seminars/Workshops Attended:

  • Undergone In plant Training in Tuticorin Thermal Power Station, Tuticorin (2002).
  • Undergone Project Training Programme on “Failure Analysis of Centre Buffer Coupler” in Southern Railway, Chennai (2003).
  • Attended a Training Programme on “Recent Trends in Measurement and Inspection Techniques in Manufacturing Industries”, Department of Manufacturing Engineering, College of Engineering, Anna University, Chennai (2007).
  • Attended a one-day short-term course on “Hyper Mesh “–Software Demo” at IITM (2011).

Achievements and Awards:

  • SSLC first rank in school , 2003
  • First Prize in Paper Presentation at national Conference, GKM Engg. College chennai, 2009
  • Silver medalist in Post graduate at CEG, Anna University, Chennai – 2009
  • Topper in PhD course work (9.5 CGPA) at IIT Madras.
 

 

 

J Prabhuraj
Mr. J. Prabhuraj 

Assistant Professor
Mail: prabhuraj.j@ktr.srmuniv.ac.in
Area: Commerce
Affiliation: Faculty Of Science And Humanities, SRM Institute of Science and Technology (formerly known as SRM University), Kattankulathur.

Education
Ph.D Management Bharathiar University, Pursuing
M.Phil Management Bharathiar University, 2015
M.Com Commerce University of Madras, 2015
SET Management Bharathiar University, 2011
NET Management UGC, 2010
MBA Business Administration Anna University, 2008
B.Com Commerce University of Madras, 2006

Other Details:

Courses

  • Financial Accounting
  • Marketing
  • Entrepreneurial Development
  • Personnel Management

Research Interests

  • Human Resource Management
  • Systems

Selected Publications

Papers Presented:

  • Presented the paper on “A Study On The Role Of Strategic Innovations In Sustainable Development Of Business” in the International Conference conducted by Hindustan University on 13th &14th of September 2012 (ISBN Number -978-93-81208-11-3)
  • Presented the paper on “ An Impact Of Competency Mapping In The Emerging Organisation At Global Level”in the international conference by SRM  University on 26th feb 2013(ISBN Number  - 978-81-923607-6-8)

Work in Progress

  • Articles on Entrepreneurial Skills and Marketing Technology is in Process of Publication in Scopus Indexed Journals

Academic Experiences

  • Assistant Professor, Faculty of Science & Humanities, SRM Institute of Science and Technology (formerly known as SRM University), since August 2011
  • Lecturer, Shree Chandra Prabhu Jain College, Minjur, 2011

Achievements and Awards

  • Organised International National Level Conference in Human Resource  in Feb 2012
  • Organised InternationConference  on HRM in Feb 2013

 

Pages